SMD貼片LED 3014側發光

產品介紹：

產品特點：

1.節能，低功耗，相比傳統燈具可省電60%-80%；高均勻度，采用進口光學級導光板及優質霧化板，可使LED所發光能充分利用并均勻擴散，以達到高亮度高均勻度特性；

2.超長壽命LED超級節能燈的使用理論壽命可達上萬小時以上，普通白熾燈使用壽  命1000多小時。

3.綠色環保不含汞和鉛等有害元素，得利于回收和利用，而且不會產生電磁干擾，普通燈管中含有汞和鉛

廣泛應用：

應用場所：墻面裝飾博物館藝?yán)?nbsp 美容院咖啡廳  飯店酒店展會珠寶店 背光等多種場合，

產品尺寸圖：

PART NO. （型號）CHIPLens ColorMaterialSource Color3014白光ALInGaPWhite（白色）yellow（黃色）            Notes:1.              All dimensions are in millimeters (inches).所有單位是毫米（英寸）2.                  Tolerance is ± 0.25mm (.010”) unless otherwise noted. 允許誤差為正負0.25mm，除非另行通知。3.              Specifications are subject to change without notice.規格可能隨時有變化，不另行通知。4.              This data-sheet only valid for six months.本數據有效期為六個月Absolute Maximum Ratings at TA=25℃

 

Parameter(參數)

Valce（標準值）Unit（單位）Power Dissipation（消耗功率）120mWPilsed  Forward Current（脈沖順向電流）(1/10 Duty Cycle， 0.1ms Pulse width100mAContinuous Forward Current（連續工作電流）20mADerating Linear From 50℃（電流比例關系）0.4mA /℃Reverse Voltage（反向電壓）5VOperation Temperature Range（工作溫度）-40℃ to +80℃Storage Temperature Range（儲存溫度）-40℃ to +80℃Lead Soldering Temperature[4mm (.157”) From Body]（焊接溫度）260℃ for 5 Seconds（260度下不超過5秒）Electrical / Optical Characteristics at TA=25℃Parameter（參數）Symbol標志Min.最小值Typ.中間值Max.最大值Unit單位Test Condition測試條件Luminous Intensity（亮度）IV180020002500mcdIF=20mA Note 1.4Source color(發光顏色)CCT5500  5500KIF=20mA Note4Viewing Angle（發光角度）2θ1/2115120125degNote 2Forward Voltage（正向電壓）VF3.03.23.6VIF=20mAReverse Current（反向電流）IR——5μAVR=5VNote：1.Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L’Eclairage) eye-response curve.          2.1/2 is the off-axis angle at which the luminous intensity is half the axial luminous and intensity.        3.The dominant wavelength， λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.            4.The IV guarantee should be added ±15%.